2026 Southland 7×20 15K Partial Tilt Equipment Trailer

The 2026 Southland 15k partial tilt equipment trailer is an equipment trailer built for owners who need dependable hauling capacity. It comes with a 15,000 lbs GVWR. It is in stock now at NordStar Trailers.

15K Partial Tilt Equipment Trailer Features

• Standard Features:
• (2) 7000lb Lippert Spring Axles
• ST235/80R16 Tires
• Electric Brakes
• 8" x 2" HSS Tube Frame and Tongue
• Cross-member: 3" I-beam 80 KSI
• 3/16" Steel Drive Over A-Frame Spring Assisted Toolbox
• Adjustable Flow Stillwell Hydraulically Dampened Cylinder
• 4′ Stationary Deck + 16′ Tilt Deck
• 82" Between Fenders
• Knife Edge Tail
• Full Rub Rail and Stake Pockets
• HD Fir Plank Decking
• (4) D-Rings
• Bolted Fenders
• LED Lights
• Fully Enclosed Wiring
• 12K Side-Wind Jack

Features and specifications for this 15k partial tilt equipment trailer come from the manufacturer and can change. Confirm any detail that matters to you with our team before you buy.

Why Choose an Equipment Trailer?

An equipment trailer is built for heavy, concentrated loads like skid steers, mini excavators and tractors, with a stronger frame and deck than a standard utility trailer.

Construction and Excavation

Move skid steers, compact track loaders, mini excavators and attachments between job sites.

Farm and Ranch

Haul tractors, implements, hay and fencing supplies with a deck built for weight.

Rental and Hauling Businesses

A reliable equipment trailer helps you deliver machines and materials for customers without delays.

More About This Southland Trailer

2026 Southland 7×20 15K Partial Tilt Equipment Trailer w/Drive-On Toolbox, Spare Tire, D-Rings

Towing Your 15K Partial Tilt Equipment Trailer

Before you hit the road, confirm that your tow vehicle, hitch and ball are rated for the fully loaded weight of the trailer, up to the 15,000 lbs GVWR. Use a brake controller when the trailer has electric brakes, and check tire pressure, lights, safety chains and coupler before every trip.

Load heavier items slightly ahead of the axles so the trailer has proper tongue weight, and secure every load with rated straps or chains. For general towing safety guidance, see the National Highway Traffic Safety Administration.

Choosing the Right Equipment Trailer

Before you choose this 15k partial tilt equipment trailer or any other trailer, start with your heaviest load. Add the weight of the cargo, straps, tools and anything else you carry, then compare that total to the trailer’s payload, which is the GVWR minus the empty trailer weight. Leave some margin so you are not running at the limit on every trip.

Next, measure. Check the length and width of what you haul, plus room to walk around it and secure it. Then confirm that your tow vehicle’s rating, hitch class and brake controller match the loaded trailer.

For equipment trailers, compare deck length, ramp or tilt style, and the approach angle for low-clearance machines.

15K Partial Tilt Equipment Trailer Care and Maintenance

• Check tire pressure and tread before every trip, including the spare.
• Test the lights, wiring and breakaway system, if equipped.
• Service wheel bearings on the schedule in the owner’s manual.
• Check brakes, suspension and U-bolts for wear or damage.
• Look over the frame, welds, deck and coupler for cracks or loose hardware.
• Check ramps, springs and any tilt or pivot points for smooth operation.
• Wash off road salt and dirt, especially after winter driving.

Following the manufacturer’s maintenance schedule helps your trailer last longer and keeps it safe on the road.

Frequently Asked Questions

What is the difference between GVWR and payload?

GVWR is the maximum allowed weight of the trailer and its load together. Payload is how much cargo you can add, which is the GVWR minus the trailer’s empty weight.

Do I need trailer brakes?

Brake requirements vary by state and are usually based on the loaded trailer weight. Check your state’s rules and the trailer’s brake setup before towing.

What is the GVWR of this 15k partial tilt equipment trailer?

The GVWR is 15,000 lbs. That is the maximum weight of the trailer plus its load, so subtract the trailer’s empty weight to find how much cargo it can carry.

How do I load equipment safely?

Load on level ground, center the machine slightly forward of the axles, and secure it with rated chains and binders at each corner.

Do you offer delivery or financing?

Contact our team for current delivery, financing and pickup options.

How do I buy this trailer?

Call us or send a message through our contact page with the stock number, and our team will confirm availability and pricing.

Get This 15K Partial Tilt Equipment Trailer Today

This 15k partial tilt equipment trailer is in stock and ready to go. Contact NordStar Trailers for a quote, browse more equipment trailers, or see our full trailer inventory.